2 Tier MetaClip Shelving System


System offered is as per the attached floor plan diagram.

Price is for supply and delivery only UK Mainland excluding Highlands and any offshore Islands.

Installation can be arranged. Cost is dependent on location.

Other size constructions are available, please enquire for details.

Prefabricated frames and shelves, made of cold-rolled first class steel are the main parts of our shelving systems. A quick, easy and boltless fitting is guaranteed.
The shelves are height-adjustable in 25mm vertical increments.

Our Shelving is designed in accordance and conforms to:
Static load calculations for the shelving to DIN EN 15512 (formerly FEM 10.2.02), DIN EN 1993-1-1,
and the corresponding FEM guidelines.
Product is certified to DIN EN ISO 9001-2008.
Products carry the GS symbol and the RAL-RG 614 quality mark.
Material Finish:

  • End Open Frames: Galvanized
  • Intermediate Open Frames: Galvanized
  • Shelves: Galvanized

The frames consist always of galvanised material. We however, offer alternatives with a powder-coated surface – for the most optimal corrosion protection.

Technical information:

  • Total Height Standard Frame: 4,000 mm
  • Depth: 600 mm
  • Width: 1.000 mm
  • No. of Shelves per Bay (Including Top & bottom): 7 No.
  • Max. load capacity of the shelves (UDL): 100 Kg
  • Total Number Shelves: 222 No.
  • Total Number of Bays on Ground Floor: 32 No.
  • Total Number of Bays on First Floor: 32 No.
  • Finished Floor Level 2.336 mm
  • Max. bay load inc. floor load – @ max 750mm Pitches: 1.780 Kg
  • End Frames: (Pre-Assembled) Open
  • Intermediate Frames: (Pre-Assembled) Open
  • Backs: Open X Braced
  • Floor Fixings: Included on perimeter
  • Surface pressure: 118,66 daN/cm2

All loading specifications are valid for evenly distributed load.
Bay Loads stated are based on run lengths of 3 or more bays, with runs less than three bays
the following applies: 2 Bays = 90% & 1 Bay = 80%.
Bay Loads: Based on the information provided, any changes to bay elevations may have an
effect on the Bay Loads stated, please seek advice from Simply Mezzanine Floors.
The floor consists of:
Floor supporting structure for aisles consists of C profiles and bearers , brackets, C Sections
and columns.
Hand railing to all Open Edges.
31 m2 Bar grating frame 30/2 opening 33x33
Finish – Galvanised shelving / structural components painted blue as standard.
1 x Staircase the steps have holes and both-sides hand and knee railed.
Total Projected Length of the staircase: approx. 3.400 mm.
Width of the staircase: 1.000 mm, incline of the staircase: 35 degrees

More details

£ 10,600.00